Pure Power Box

Wired-In or Plug in

Protects, Cleans and Reduces Harmful EMF

Your Image
Whole-home Energy Management System. Installs at breaker panel (licensed electrician required). For homes less than 2500 sq. ft. Features & Benefits: Surge protection, line conditioning, EMF reduction, voltage regulation, negative harmonics reduction, reduced electrical consumption, equipment longevity, energy savings.  Ratings: 240 V, 15 A, 3600 W, 50/60 Hz.
Standard Power Perfect Box Highlights
  • 120/208, 120/240 Volt Single Split-Phase Electricity Conditioner
  • Low Power Losses, < 0.5 Watts per 1000 VAr
  • Operating Temperature Range of -55°C to +90°C
  • General Enclosure: NEMA 3X Indoor/Outdoor
  • Electrical Harmonics Elimination (THD Reduction)
  • Three-Way Electrical Protection
  • Self-healing metalized Harmonic Rectifiers
  • Robust Tri-circuit Integrated Surge Protection
  • EMI/RFI Noise Reduction 0-50 dB
  • Wire Rating: 600 Volts, THHN/ MTW/ THWN-2
  • Box Size 8” X 8” X 4”
  • EMF/EMR Reduction
  • Voltage Moderation
  • Power Factor Compensation
  • Surge Suppression

Your Image

The Pure Power Plug-In plugs into any standard 120V outlet to reduce negative harmonics and EMF radiation while increasing efficiency and reducing power costs for common appliances such as refrigerators, freezers and air conditioners. One Pure Power Plug-In will filter and condition the power on the circuits on a single phase.  This product is also known as the EMF Eliminator.

These are especially popular for those renting or leasing a house, an apartment or office space and have moderately high EMF and EMI levels.

Power Perfect Box and Pure Power Plug-In correct electrical systems in real-time, reducing heat, lowering amperage and lessening the harmful effects of electromagnetic interference and negative harmonics commonly referred to as “electrical noise” or “dirty electricity”.

Manufactured in the U.S.A. of quality components with meticulous six sigma build standards, guaranteed performance and warranted against failure.

Effective solution that plugs into a standard outlet and filters harmonics and interference from your electrical circuit to providing clean power and reduced electromagnetic field (EMF) radiation.

How do I use the Pure Power Plug?

Plug the Satic Pure Power Plug-In into any wall outlet. The product works best in areas with inductive loads such as the laundry room (washer/dryer), kitchen (appliances/refrigerator), and living room (entertainment center).

What does the Pure Power Plug in do?

The Satic Pure Power Plug-In will help your appliances and electronics run cooler, smoother, last longer and run more efficiently, thereby ultimately saving energy. No other system has this extraordinary combination of circuit board design, optimized power factor correction modules, line conditioning, voltage regulation, nano-surge filtration, electromagnetic field reduction and negative harmonics reduction with extremely robust surge protection. All this is packaged into Satic’s unique plug-in design, allowing it to be smaller, more affordable and more effective than anything else on the market today, at any price.

Technical Specifications

ES120 Pure Power Plug-In Technical Specifications

Pure Power Plug-In Characteristics

Max AC Voltage (Charge Potential): 300 Volts

Single Phase Voltages Available: 120 Volts, USA (300 Volt L - N MAX)

Input Power Frequency: 50/60 Hz

Current Requirements @ 120 Volts: 0.85 Amps

Operating Temperature: -55°C to +90°C

Operating Humidity: 5% to 95%, Noncondensing

Operating Altitude: Up to 16,000 ft (5000m)

Surge Suppression

Voltage (Continuous) 250 Volts , 424 Volts

(Max Clamping) 650 Volts

Current (Peak Surge) 6.5 kAmps

(Rating) 6500 Amps

Transient Dissipation Potential Each Circuit (Surge Energy): 1300 Joules/μs

Protection Modes (Single Circuit): L1-N, RMS, DC, RMS


Made in Montana

Made in USA

UL - E337361 - Closed Energy Management Equipment 3ZJ9

FCC - Approved (UL Tested for Compliance)

CE - Low Voltage Directive 2006/95/EC

CE - Electromagnetic Compatibility (EMC) 2004/108/EC

RoHS - Lead Free - Restriction of Hazardous Substances

Your Image

Protect your Home, Business Family and Staff from EMF with Satic's Energy Management Systems..

Typically, if you place 2-3 units in the recommended locations, you will more than recoup your investment in under 12 months in most cases. With Satic’s Energy Management Systems, you get to save money and help the environment by maximizing electrical efficiency without changing your lifestyle at all.

Your Image



Shipping Address

Unfortunately, we cannot ship to your location at this time. Please update your shipping address and try again.

Payment Options

Coupon Code

[[coupon_message.text]] [[cart_coupon.text]]


Payment Methods

Order Summary

[[invoiceItem.quantity]] x [[invoiceItem.unit_price | currency]]
[[checkoutContext.order.invoice.subtotal | currency]]
[[checkoutContext.order.invoice.tax | currency]]
[[checkoutContext.order.invoice.shipping | currency]]
-[[checkoutContext.order.invoice.discount | currency]]
[[checkoutContext.order.invoice.total | currency]]
Powered by SamCart